Cultivation
Biodiesel algae can be cultured in raceway-type ponds and lakes Due to the fact that these systems are "open" to the elements, sometimes
called "open-pond" systems, they are much more vulnerable to being invaded by other algal species and bacteria. The number of species that
have been successfully cultivated for a given purpose, (i.e.: as a food source, for oil production, or for pigments.), in an outdoor system,
are relatively small. In open systems you do not have control over water temperature, and you have little control over lighting
conditions.
The growing season is largely dependent on location and, aside from tropical areas, is limited to the warmer months. Some of the benefits
of this type of system are that it is one of the cheaper ones to produce - at the most basic you only need to dig a trench or pond. It also
has one of the largest production capacities compared to other systems, and depending on how large it's made. A variation on the basic
"open-pond" system is to close it off, to cover a pond or pool with a greenhouse. While this usually results in a smaller system, (for
economic reasons), it does take care of many of the problems associated with an open system. It allows more species to be able to be grown,
it allows the species that are being grown to stay dominant, and it extends the growing season, only slightly if unheated, and if heated it
can produce year round.
Algae can be grown in a photo bioreactor. A photo bioreactor is basically a bioreactor which incorporates some type of light source. While
almost anything that it would be possible to grow biodiesel algae in could technically be called a photo bioreactor, the term is more
commonly used to define a closed system, as opposed to an open tank, or pond. Because these systems are closed, when used to cultivate algae,
everything that the biodiesel algae need to grow, carbon dioxide, nutrient-rich water and light), all must be introduced into the system. A
pond covered with a greenhouse could be considered a photo bioreactor.
Different types of photo bioreactors include:
- Tanks provided with a light source.
- Polyethylene sleeves or bags.
- Glass or plastic tubes.
In most algal-cultivation systems, light only penetrates the top 3-4 inches of the water. This is because as the biodiesel algae grow and
multiply they become so dense that they block light from reaching deeper into the pond or tank. biodiesel Algae only need about 1/10 the
amount of light they receive from direct sunlight. Direct sunlight is often too strong for algae. In order to have ponds that are deeper than
4 inches algae growers use various methods to agitate the water in their ponds, exposing the biodiesel algae below to light and keeping algae
on the surface from being over-exposed.
- Paddle wheels can be used to circulate the water in a pond.
- Compressed air can be introduced into the bottom of a pond or tank, bringing biodiesel algae from the lower levels up to the top to
receive its share of light.
Aside from agitation, another means of supplying light to algae is to place the light in the system.
- Glow plates are sheets of plastic or glass that can be submerged into the water of a tank, providing light directly to the biodiesel
algae at the right concentration.
The odor that many people associate with bogs or swamps, or stagnant ponds that have been taken over by algae is due to the depletion of
oxygen in the water caused by the death of algal blooms that have been left to decay. Often the oxygen is depleted to the point where it
kills all the fish, resulting in an even worse smell. In a system where biodiesel algae is intentionally cultivated, maintained, and
harvested, this situation shouldn't arise, the air around an algal pond should actually be very fresh from all the oxygen produced.
Harvesting
Biodiesel Algae can be harvested using micro screens, by centrifugation, or by flocculation and ferric chloride are chemical flocculants
used to harvest algae.
Chitosin can be used as a flocculant. The shells of crustaceans are ground into powder and processed to acquire chitin, a polysaccharide
found in the shells, from which Chitosin is derived. Chitosin is commonly used for water purification.
The more brackish, or saline the water that the biodiesel algae is being grown in, the more chemical flocculant will be required to induce
flocculation. Harvesting by chemical flocculation is a method that is often too expensive for large operations.
Autoflocculation Interrupting the CO2 supply to an algal system can cause algae in it to flocculate.
Oil Extraction
- Chemical solvents-Algal oil can be extracted using chemicals. Benzene and ether have been used, oil can also be separated by hexane
extraction, which is widely used in the food industry and is relatively inexpensive. The downside to using solvents for oil extraction
are the dangers involved in working with the chemicals. Care must be taken to avoid exposure to vapors and direct contact with the skin,
either of which can cause serious damage. Benzene is classified as a carcinogen. Chemical solvents also present the problem of being an
explosion hazard.
- Enzymatic extraction-Enzymatic extraction uses enzymes to degrade the cell walls with water acting as the solvent, this makes
fractionation of the oil much easier. The costs of this extraction process are estimated to be much greater than hexane extraction.
- Expression/Expeller press-When algae is dried it retains its oil content, which then can be "pressed" out with an oil press. Many
commercial manufacturers of vegetable oil use a combination of mechanical pressing and chemical solvents in extracting oil.
- Osmotic shock-Osmotic shock is a sudden reduction in osmotic pressure, this can cause cells in a solution to rupture. Osmotic shock
is sometimes used to release cellular components, such as oil.
- Supercritical fluid-In supercritical fluid/CO2 extraction, CO2 is liquefied under pressure and heated to the point that it has the
properties of both a liquid and a gas, this liquefied fluid then acts as the solvent in extracting the oil.
- Ultrasonic extraction, a branch of sonochemistry, can greatly accelerate extraction processes. Using an ultrasonic reactor,
ultrasonic waves are used to create cavitations bubbles in a solvent material, when these bubbles collapse near the cell walls, it
creates shock waves and liquid jets that causes those cells walls to break and release their contents into the solvent
- Soxhlet extraction
- U.S. patent: Process for extracting lipids with a high production of long-chain highly unsaturated fatty acids
Algae as an energy source
Biodiesel production
Department of Energy Aquatic Species Program; Biodiesel Production from Algae. ()
Currently most research into efficient algal-oil production is being done in the private sector, but if predictions from small scale
production experiments bear out then using algae to produce biodiesel may be the only viable method by which to produce enough automotive
fuel to replace current world gasoline usage. Micro algae have much faster growth-rates than terrestrial crops. The per unit area yield of
oil from algae, (estimated to be from between 5,000 to 20,000 gallons per acre, per year), is 7 to 31 times greater than the next best crop,
palm oil(635gal).
Algal-oil processes into biodiesel as easily as oil derived from land-based crops. The difficulties in efficient biodiesel production from
algae lie not in the extraction of the oil, which can be done using methods common to the food-industry such as hexane extraction, but in
finding an algal strain with a high lipid content and fast growth rate that isn't too difficult to harvest, and a cost-effective cultivation
system (i.e., type of photo bioreactor) that is best suited to that strain. Open-pond systems for the most part have been given up for the
cultivation of algae with high-oil content. Many believe that a major flaw of the Aquatic Species Program was the decision to focus their
efforts exclusively on open-ponds, this makes the entire effort dependent upon the hardiness of the strain chosen, requiring it to be
unnecessarily resilient in order to withstand wide swings in temperature and pH, and competition from invasive algae and bacteria.
The energy that a high-oil strain invests into the production of oil is energy that is not invested into the production of proteins or
carbohydrates, usually resulting in the species being less hardy, or having a slower growth rate. Algal species with a lower oil content, not
having to divert their energies away from growth, have an easier time in the harsher conditions of an open system. Research into algae for
the mass-production of oil (or algae biodiesel) is mainly focused on micro algae, (which is a term generally referred to as organisms capable
of photosynthesis that are less than 2 mm in diameter, including the diatoms and cyanobacteria), as opposed to macro algae, (i.e..
seaweed).
This preference towards micro algae is due largely to its less complex structure, fast growth rate, and high oil content- (for some
species). Some commercial interests into large scale algal-cultivation systems are looking to tie-in to existing infrastructures, such as
coal power plants or sewage treatment facilities. This approach not only provides for the needs of the system, such as CO2 and nutrients,
which, if the facility were built independently, would have to be otherwise acquired, but in addition it remediate waste. In July 2006, Petro
Sun Drilling Inc, a oilfield service company, announced the creation of Algae BioFuels , a wholly owned subsidiary dedicated to this
area.
SVO
The algal-oil feedstock that is used to produce biodiesel can also be used for fuel directly as " Straight Vegetable Oil, While using the
oil in this manner does not require the additional energy needed for transesterification, (processing the oil with an alcohol and a catalyst
to produce biodiesel), it does require a special engine designed for its use, or modifications to a normal diesel engine, whereas biodiesel
can be run in any modern diesel engine, unmodified, that is designed to use ultra-low sulfur diesel, the new diesel fuel standard for the
United States that goes into effect in the fall of 2006.
Hydrogen production
Algae can be grown to produce hydrogen. In 1939 a German researcher named Hans Gaffron, while working at the University of Chicago,
observed that the algae he was studying, Chlamydomonas reinhardtii (a green-algae), would sometimes switch from the production of oxygen to
the production of hydrogen. Gaffron never discovered the cause for this change and for many years other scientists failed in their attempts
at its discovery. In the late 1990's professor Anastasios Melis, a researcher at the University of California at Berkeley discovered that by
depriving the algae of sulfur it will switch from the production of oxygen, to the production of hydrogen. He found that the responsible for
this reaction is hydrogenise, but that the hydrogenise will not cause this switch in the presence of oxygen. Melis found that depleting the
amount of sulfur available to the algae interrupted its internal oxygen flow, allowing the hydrogenise an environment in which it can react,
causing the algae to produce hydrogen. Chlamydomonas moewusii is also a good strain for the production of hydrogen.
See also: